If a pipe won’t thaw, or it has split and is leaking, we can make it safe, find exactly where it failed and repair it properly.
What should I do if my water pipes freeze?
How to thaw a frozen pipe safely, check it hasn't split, and keep your pipes from freezing this winter.
By Plumbing Correct
When the temperature drops below freezing, water in an exposed pipe can turn to ice. The first sign is usually a cold tap that slows to a trickle or stops altogether, often one fed by a pipe in a loft, a garage or along an outside wall. If you think a pipe has frozen, turn off the water at the stopcock, open the tap it feeds, and warm the pipe slowly with a wrapped hot water bottle or a hairdryer on its lowest setting. Never use a flame or boiling water.
This post explains why frozen pipes split, how to find the frozen section, how to thaw it safely, what to check once the water flows again and how to stop it happening this winter. You can do most of this yourself. A split pipe, water near electrics or a pipe you can't reach safely is a job for a plumber.
Why a frozen pipe can split
Water expands as it turns to ice. Inside a pipe it has nowhere to go, so it pushes against the pipe walls and the joints. Copper pipe can split along its length, and push-fit joints (plastic fittings that grip the pipe without solder) can be forced apart.
The damage often stays hidden while the pipe is frozen, because the ice plugs the gap. Thames Water, which supplies homes across London, points out that leaks usually appear as the ice melts and water finds the crack. That is why the water should be off before you start thawing, and why slow, gentle warming is safer than fast heat.
Signs a pipe has frozen
Frozen pipes tend to show up on the coldest mornings, often after a clear, frosty night. Look for:
one cold tap that runs slowly or not at all while the others are fine
a toilet cistern that won't refill
an outside tap that gives nothing
frost on the outside of a pipe, or one section that feels much colder than the rest
Run your hand along the pipe from the tap backwards. The frozen section is usually where it passes through the coldest space: a loft, a garage, an unheated cupboard on an outside wall or the void under a timber floor.
How to thaw a frozen pipe safely
Take it slowly. These steps follow the advice Thames Water gives its customers.
Turn off the water at the stopcock. If you're not sure where it is, our guide on finding and using your stopcock shows the usual places.
Open the cold tap the frozen pipe feeds, so melting water can escape and you'll see when it's clear.
Move anything you want to keep dry away from the pipe, and take off any lagging (foam insulation) from the frozen section.
Warm the pipe gently with a hot water bottle wrapped in a towel, warm cloths, or a hairdryer on low. Start nearest the tap and work back towards the frozen part, so melted water has somewhere to go.
Once water runs, turn the tap off, wipe the pipe and joints dry and check them with a dry cloth before turning the stopcock back on slowly.
What never to do
A frozen pipe is frustrating, but rushing the thaw is what turns it into a burst one.
Never use a blowtorch, heat gun or any naked flame. Pipes often run through lofts and floor voids next to dry timber and insulation, and a flame can start a fire or damage soldered and plastic joints.
Don't pour boiling water over a supply pipe. The sudden change in temperature can crack fittings. Don't hit the pipe to break up the ice, and keep a hairdryer well away from any water on the floor.
If the pipe has split
If you see water once the ice melts, turn the stopcock off again and leave it off. Open the cold taps to drain what's left in the pipes, catch drips in a bucket, and move belongings out of the way. If water is near sockets, light fittings or the consumer unit (the fuse box), only switch the power off there if you can reach it from a completely dry spot.
Burst pipes inside your property are the homeowner's responsibility, not the water company's, so it's worth checking now that your home insurance covers escape of water.
A split pipe needs a plumber. When we come out, we trace exactly where the pipe has failed, make the supply safe, replace the damaged section and test the repair before turning everything back on. Our emergency plumber service is there for leaks that can't wait.
A frozen boiler condensate pipe
Modern condensing boilers drain waste water through a plastic pipe called a condensate pipe, which often runs down an outside wall. If it freezes, the boiler shuts itself down and shows a fault code, sometimes with a gurgling or bubbling noise.
Boiler manufacturers such as Glow-worm suggest pouring warm (not boiling) water along the outside section of the pipe, or holding a hot water bottle against it, then restarting the boiler using the steps in its manual. Take care, as spilt water can freeze into a slip hazard. Never open the boiler casing. If the boiler won't restart, or the pipe freezes every winter, our boiler repairs service can find out why and fix it properly.
How to stop your pipes freezing this winter
A little preparation before the first hard frost saves most of the trouble.
Lag exposed pipes in the loft, garage and along outside walls with foam pipe insulation from any DIY shop.
Fit an insulated cover on the outside tap. If it has an isolating valve indoors, turn it off and run the tap dry.
Keep the heating on low when you go out during a cold spell, rather than letting the house go cold.
If you're going away, Thames Water suggests turning off the stopcock and draining the system so there's no water to freeze.
Fix dripping taps, as constant drips can freeze in the waste pipe.
Find your stopcock now and check it turns, so you're not searching for it in an emergency.
If a pipe has frozen and you're unsure whether it's safe to thaw, or the water won't come back after it has, Plumbing Correct can come and take a look. For a pipe that has split or is leaking, book our emergency plumber service and we'll make it safe and repair it properly.
